There are 205 products.
“Shadow Box” is a 3D photo frame with deep square sections to create 3D collages.
size: 5x6x4.5 cm
Material: 3mm thick MDF,doesn’t require additional sanding
check our shadow boxes click here
“Shadow Box” is a 3D photo frame with deep square sections to create 3D collages.
Material: 3mm thick MDF,doesn’t require additional sanding
check our shadow boxes click here
“Shadow Box” is a 3D photo frame with deep square sections to create 3D collages.
In the set: sport equipment - 8 pcs
Material: 3mm thick MDF,doesn’t require additional sanding
check our shadow boxes click here
“Shadow Box” is a 3D photo frame with deep square sections to create 3D collages.
In the set:
Material: 3mm thick MDF,doesn’t require additional sanding
check our shadow boxes click here
“Shadow Box” is a 3D photo frame with deep square sections to create 3D collages.
3D figurine kit for shadow boxes decorating - 6pcs
Material: 3mm thick MDF,doesn’t require additional sanding
check our shadow boxes click here
“Shadow Box” is a 3D photo frame with deep square sections to create 3D collages.
Material: 3mm thick MDF,doesn’t require additional sanding
check our shadow boxes click here
for self-assembly
Size: 8.5 х 8.5 х 18.0 mm
Material: 3mm thick MDF,doesn’t require additional sanding
Size: 7.5 х 8.5 х 10.0 cm
for self-assembly
Material: 3mm thick MDF,doesn’t require additional sanding
The organizer is a single module.
Spatial model for self-gluing, dimensions after folding about 10x10x10 cm (the wall with the tenement house is about 20 cm high
you can buy 3 different modules in one set here click
The organizer is a single module.
Spatial model for self-gluing, dimensions after folding about 10x10x10 cm (the wall with the tenement house is about 20 cm high
you can buy 3 different modules in one set here click
The organizer is a single module.
Spatial model for self-gluing, dimensions after folding about 10x10x10 cm (the wall with the tenement house is about 20 cm high
you can buy 3 different modules in one set here click
They are made of 3mm thick MDF which does not require additional sanding.
All parts are assembled on one plate
Size: 22.0 х 16.5 х 6.5mm
video tutorial - CLICK HERE
IMPORTANT! Do not break the elements out of the base. Carefully cut the elements at the attached points.
They are made of 3mm thick MDF which does not require additional sanding.
All parts are assembled on one plate
In the set: door - 13.5 x 1.5 x 15.0 cm.
IMPORTANT! Do not break the elements out of the base. Carefully cut the elements at the attached points.
They are made of 3mm thick MDF which does not require additional sanding.
All parts are assembled on one plate
In the set: door - 5.5 x 1.3 x 5.0 cm, window - 8.7 x 1.0 x 8.0 cm
ATTENTION! Do not break the parts out of the plates, carefully cut them at the points of attachment along the contour.
They are made of 3mm thick MDF which does not require additional sanding.
You can choose from 2 sizes , check filter:
10.5 is the windows with size : 10.5 x 8.0 x 5.0 cm - 2 pcs.
or
12.5 is the windows with size: 12.5 x 8.0 x 6.0 cm - 2 pcs.
They are made of 3mm thick MDF which does not require additional sanding.
In the set: window - 7.0 x1.5 x 6.0 cm, window - 7.0 x 1.5 x 6.0 cm, window - 5.5 x 1.0 x 5.0 cm
IMPORTANT! Do not break the elements out of the base. Carefully cut the elements at the attached points.
They are made of 3mm thick MDF which does not require additional sanding.
Size: 27.5 x 10.8 cm
IMPORTANT! Do not break the elements out of the base. Carefully cut the elements at the attached points.
They are made of 3mm thick MDF which does not require additional sanding.
Size: 27.5 x 11.0 cm
IMPORTANT! Do not break the elements out of the base. Carefully cut the elements at the attached points.
They are made of 3mm thick MDF which does not require additional sanding.
Size: 27.5 x 11.0 cm
IMPORTANT! Do not break the elements out of the base. Carefully cut the elements at the attached points.
They are made of 3mm thick MDF which does not require additional sanding.
Size: 21.0 x 14.5 cm
Blank base for creativity, made of specially processed MDF 3mm thick.
The workpiece is double-sided, does not require preliminary priming.
Dimensions approx: 19.2 x 28.5 cm - LARGE
Blank base for creativity, made of specially processed MDF 3mm thick.
The workpiece is double-sided, does not require preliminary priming.
Dimensions approx: 18.9 x 21.2 cm - LARGE
Blank base for creativity, made of specially processed MDF 3mm thick.
The workpiece is double-sided, does not require preliminary priming.
Dimensions approx: 18.1 x 11.7 cm - LARGE
Blank base for creativity, made of specially processed MDF 3mm thick.
The workpiece is double-sided, does not require preliminary priming.
Dimensions approx: 17.1 x 16.2 cm - LARGE
Blank base for creativity, made of specially processed MDF 3mm thick.
The workpiece is double-sided, does not require preliminary priming.
Dimensions approx: 29.2 x 10.2 cm - LARGE
Blank base for creativity, made of specially processed MDF 3mm thick.
The workpiece is double-sided, does not require preliminary priming.
Dimensions approx: 40cm x 36cm - LARGE
Blank base for creativity, made of specially processed MDF 3mm thick.
The workpiece is double-sided, does not require preliminary priming.
The kit includes a mounting bracket.
Dimensions: 30cm x 32.5cm - LARGE
Blank base for creativity, made of specially processed MDF 3mm thick.
The workpiece is double-sided, does not require preliminary priming.
The kit includes a mounting bracket.
Dimensions: 33cm x 25cm- LARGE
Blank base for creativity, made of specially processed MDF 3mm thick.
The workpiece is double-sided, does not require preliminary priming.
The kit includes a mounting bracket.
Dimensions: 25 cm x 25 cm - LARGE
Assembly:
connect the parts following the attached step-by-step diagram;
apply adhesive where necessary.
ATTENTION! Do not break the parts out of the plates, carefully cut them at the attachment points along the contour.
Material: fiberboard 3mm thick
Assembly:
connect the parts following the attached step-by-step diagram;
apply adhesive where necessary.
ATTENTION! Do not break the parts out of the plates, carefully cut them at the attachment points along the contour.
Material: fiberboard 3mm thick
Assembly:
connect the parts following the attached step-by-step diagram;
apply adhesive where necessary.
ATTENTION! Do not break the parts out of the plates, carefully cut them at the attachment points along the contour.
Material: fiberboard 3mm thick
Assembly:
connect the parts following the attached step-by-step diagram;
apply adhesive where necessary.
ATTENTION! Do not break the parts out of the plates, carefully cut them at the attachment points along the contour.
Material: fiberboard 3mm thick
Assembly:
connect the parts following the attached step-by-step diagram;
apply adhesive where necessary.
ATTENTION! Do not break the parts out of the plates, carefully cut them at the attachment points along the contour.
Material: fiberboard 3mm thick
Assembly:
connect the parts following the attached step-by-step diagram;
apply adhesive where necessary.
ATTENTION! Do not break the parts out of the plates, carefully cut them at the attachment points along the contour.
Material: fiberboard 3mm thick.
They are made of 3mm thick MDF which does not require additional sanding.
3D base for self-assembly using an adhesive, MAGIC GLUE
Size: 28.0 x 24.5 x 44.5 cm / huge
Non-toxic.
They are made of 3mm thick MDF which does not require additional sanding.
3D base for self-assembly using an adhesive, MAGIC GLUE
Size: 18.0 x 15.5 x 28.5 cm
Non-toxic.
They are made of 3mm thick MDF which does not require additional sanding.
3D base for self-assembly using an adhesive, magic glue
Size: 11.0 х 9.5 х 17.0 cm
Non-toxic.
MDF – set
Thickness: 3mm
Diameter: 17.0 cm, 21.0 cm, 28.0 cm
MDF – set
Sizes:
Dimensions - approximately: 4.80 cm x 23.2 cm
A clock base for self-decorating. Perfect for mixed media techniques, decoupage etc.
The set includes the LOVE crafting base, individual letters L, O, V, E, a clock face, mechanism, hands (hour, minute, second hand), metal pendant and a set of numbers.
Batteries are not included.
MDF – set
Thickness: 3mm
A clock base for self-decorating. Perfect for mixed media techniques, decoupage etc.
The set includes the LOVE crafting base, individual letters L, O, V, E, a clock face, mechanism, hands (hour, minute, second hand), metal pendant and a set of numbers.
Batteries are not included.
MDF – set
Sizes:
Dimensions - approximately: 4.80 cm x 15.5 cm
Thickness: 3mm
A clock base for self-decorating. Perfect for mixed media techniques, decoupage etc.
The set includes the LOVE crafting base, individual letters L, O, V, E, a clock face, mechanism, hands (hour, minute, second hand), metal pendant and a set of numbers.
Batteries are not included.
Made of wood-like material about 3 mm thick
Made of wood-like material about 3 mm thick
Made of wood-like material about 3 mm thick
Made of wood-like material about 3 mm thick
Made of wood-like material about 3 mm thick
3D base for self-assembly using an adhesive. (e.g Magic glue )
Base: 12.0 x 10.5 cm, height about 19.0 cm
3D base for self-assembly using an adhesive. (e.g Magic glue )
Base for decorating , can be as a home decor or tea bags box.
Made of lightweight 3mm thick plywood.
Dimensions: height 26.80 cm, width 16.50 cm, depth 8.0 cm.
A spacious model for self-gluing
sizes: base: 12.0 x 10.5 cm, height about 19.0 cm
Made of wood-like material about 3 mm thick
A spacious model for self-gluing, dimensions after folding approx. 15x5x7 cm / small
The organizer has the form of a single module, consisting of 3 compartments.
Made of wood-like material about 2.5 mm thick
A spacious model for self-gluing, dimensions after folding about 48 x 4 x 7 cm
The organizer has the form of a single long module, consisting of 12 compartments.
Made of wood-like material about 2.5 mm thick
Note on folding: folding should start from the side walls and compartments, and finally glue the bottom.
They are made of 3mm thick MDF which does not require additional sanding.
size: approx 26.0 cm, width 15.0 cm, depth 9.0 cm
The sideboard has a back pocket for an album, tags or cards.
Hinges are not included in the set.
They are made of 3mm thick MDF which does not require additional sanding.
sizes: 14.8 x 13.7 x 13.10 cm
They are made of 3mm thick MDF which does not require additional sanding.
size: approx 9 x 19.5 cm
They are made of 3mm thick MDF which does not require additional sanding.
size: approx 21 x 9.5 cm
They are made of 3mm thick MDF which does not require additional sanding.
size: approx 12 x 15 cm
3D base for self-assembly using an adhesive. (e.g Magic glue )
Base for decorating / mediation - 2D WINDOW - TRIPLE LAYERED WINDOW WITH FOUNDATION AND SHUTTERS.
The set consists of two-layer shutters and a base serving as a "foundation".
Made of lightweight 5mm thick plywood.
Dimensions: ~ 31.5 x 31.5 CM
3D base for self-assembly using an adhesive. (e.g MAGIC GLUE )
3 different dimensions:
12.0 x 16.0 cm
9.0 x 12.0 cm
7.5 x 10.0 cm
thickness:3mm
3D base for self-assembly using an adhesive. (e.g Magic glue )
Dimension: 27.5 x 22.0 cm , Cutout for photo: 14.0 x 9.0 cm
Size:3.5*3.9in/9*10cm thickness:0.3cm
3D base for self-assembly using an adhesive. (e.g Magic glue )
Dimension: 27.5 x 22.0 cm , Cutout for photo: 14.0 x 9.0 cm
Size:3.5*3.9in/9*10cm thickness:0.3cm
They are made of 3mm thick MDF which does not require additional sanding.
A spacious model for self-gluing, dimensions after folding about 9x15 cm
The set includes two stands and a decor
They are made of 3mm thick MDF which does not require additional sanding.
Dimensions: approx. . 25.7cm x 15.2 cm
They are made of 3mm thick MDF which does not require additional sanding.
Dimensions: approx.184x156mm
